The Maintenance Message Reset Methods in this post is for Lexmark Optra SC 1275 and Color 1200. The messege reset methods also can be applied on all models Lexmark Optra T printers.
At this time there no software resetter for all Lexmark printers. The only solution to reset the printer is using manual reset methods. Here maintenance message reset methods for Lexmark Optra SC 1275, Color 1200 and Lexmark Optra T
Lexmark Optra SC 1275, Color 1200 Maintenance Message Reset Methods
- Turn the printer off
- Hold down the GO and RETURN keys while powering on the printer until PERFORMING SELF TEST is displayed
- When REGISTRATION is displayed, press the right side of the MENU key six times until MAINTENANCE is displayed
- Press the SELECT button, and then press the right side of the menu button to scroll to 80 or 81 RESET
- Press the RETURN button until the display reads MAINTENANCE
- Press the right side of the MENU button until the display reads EXIT DIAGNOSTICS
- Press the SELECT button to return to the normal mode
Lexmark Optra T All Models Reset Methods
- Turn the printer off
- Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test, the display will read CONFIG MENU
- Press the right arrow side of the MENU button until MAINTENANCE PAGE COUNT is on the display
- Press the SELECT button. RESET should be displayed
- Press the SELECT button again to reset
- Press the RETURN button to return to the Co